Catalogue

Certex offer a range of training courses, supported and delivered by our LEEA accredited training instructors. Private courses can be tailored to your needs and delivered on your premises, hit the enquiry button in the menu bar to contact us.

e-Learning Courses

Turbine Mounted Safety Equipment (TMSE) Examination (e-Learning)

Turbine Mounted Safety Equipment (TMSE) Examination (e-Learning)

2 Days

£750.00 excl. VAT

This eLearning course provides a foundational overview of turbine-mounted safety equipment, focusing on safe installation and examination techniques. Ideal for those refreshing their knowledge or initially working under supervision, the course covers key safety principles, equipment types, and inspection practices in line with industry standards. It prepares learners to support experienced technicians and follow correct procedures in wind turbine environments.

More information
Introduction to LOLER & PUWER (e-Learning) LEEA Accredited

Introduction to LOLER & PUWER (e-Learning) LEEA Accredited

Self Paced

£175.00 excl. VAT

This LEEA-accredited e-Learning course introduces LOLER and PUWER. Designed for those involved in the use or management of lifting equipment, it provides a foundational understanding of legal responsibilities, inspection requirements, and safe use practices. Delivered by experienced trainers, the course helps participants to recognise risks, support compliance, and promote safer lifting operations.

More information

Inspection Courses

Examination & Testing of Pressure Systems Contained in Wind Turbines

Examination & Testing of Pressure Systems Contained in Wind Turbines

2 Days

£750.00 excl. VAT

This two-day course covers the inspection, testing, and examination of pressure systems in wind turbines, focusing on safety, compliance, and industry standards. It includes hands-on training in inspection techniques, WSEs, and report interpretation, helping ensure the ongoing reliability and integrity of hydraulic systems.

More information
Harness & Lanyard Inspection

Harness & Lanyard Inspection

0.5 Days

£225.00 excl. VAT

This half-day course provides the knowledge and practical skills needed to inspect safety harnesses and lanyards in line with PUWER and the Work at Height Regulations. Delivered by LEEA-accredited trainers, it covers defect identification, condition assessment, and discard criteria to support safe use and regulatory compliance.

More information
Pedestal Crane Examination

Pedestal Crane Examination

4 Days

£1,200.00 excl. VAT

This four-day course trains participants to perform thorough examinations of pedestal cranes in line with LOLER and BS7121. Delivered by experienced LEEA-accredited trainers and supported by real-world inspection engineers, it combines theory and hands-on training to assess crane condition, identify defects, and apply discard criteria to meet legal and industry standards.

More information
Crane Steel Wire Rope Inspection - LEEA Accredited

Crane Steel Wire Rope Inspection - LEEA Accredited

1 Day

£475.00 excl. VAT

This one-day LEEA-accredited course trains delegates to inspect crane steel wire ropes in line with ISO 4309. Through expert-led instruction, participants learn how to assess rope condition, identify common defects, and apply the correct discard criteria to ensure compliance with relevant legal and safety standards.

More information
Cargo Carrying Unit (CCU) Container Pre-Trip Inspection - LEEA Accredited

Cargo Carrying Unit (CCU) Container Pre-Trip Inspection - LEEA Accredited

0.5 Days

£225.00 excl. VAT

This half-day LEEA-accredited course provides participants with the knowledge and skills to carry out pre-use inspections of cargo carrying units (CCUs) in accordance with LOLER and PUWER regulations. Delivered by experienced trainers, it covers key visual checks, common defects, and reporting procedures to support safe use and regulatory compliance.

More information
Lifting Equipment Examination

Lifting Equipment Examination

2 Days

£750.00 excl. VAT

This two-day course provides the skills to examine lifting equipment in line with LOLER. Delivered by experienced LEEA-accredited trainers and enriched by real-world insight, it covers defect identification, equipment assessment, and discard criteria to meet legal and industry standards.

More information
Davit Crane Examination & Maintenance

Davit Crane Examination & Maintenance

3 Days

£950.00 excl. VAT

This three-day course trains participants to carry out thorough examinations, basic maintenance, and troubleshooting of davit cranes in line with LOLER and BS7121. While it covers davit cranes generally, there is a key focus on those used on wind turbine transition pieces. Delivered by LEEA-accredited trainers and supported by inspection engineers, the course combines theory and practical training to assess condition, identify defects, and apply discard criteria.

More information
Mobile Crane Examination

Mobile Crane Examination

4 Days

£1,200.00 excl. VAT

This four-day course trains participants to perform thorough examinations of mobile cranes in line with LOLER and BS7121. Delivered by experienced LEEA-accredited trainers and supported by real-world inspection engineers, it combines theory and hands-on training to assess crane condition, identify defects, and apply discard criteria to meet legal and industry standards.

More information
Goracon User, Installation & Maintenance

Goracon User, Installation & Maintenance

2 Days

£875.00 excl. VAT

This two-day course covers the use, installation, maintenance, and thorough examination of Goracon GWB-250-SWP and GWB-450-SWP service lifts. Delivered by Goracon-approved trainers, it combines theory and hands-on training, covering setup, operation, maintenance, fault diagnosis, and detailed inspections to ensure safe and reliable lift performance on site.

More information
Turbine Mounted Safety Equipment (TMSE) Examination & Installation

Turbine Mounted Safety Equipment (TMSE) Examination & Installation

2 Days

£750.00 excl. VAT

This two-day course provides the theoretical and practical skills to carry out installation and thorough examinations of Turbine Mounted Safety Equipment (TMSE) in line with PUWER and the Working at Height Regulations. Delivered by LEEA-accredited trainers and backed by real-world insight, it covers defect identification, condition assessment, and discard criteria.

More information
Personal Fall Protection Equipment Examination (PFPE)

Personal Fall Protection Equipment Examination (PFPE)

2 Days

£580.00 excl. VAT

This two-day course provides the theoretical and practical skills to carry out thorough examinations of Personal Fall Protection Equipment (PFPE) in line with PUWER, LOLER and the Working at Height Regulations. Delivered by LEEA-accredited trainers and backed by real-world insight, it covers defect identification, condition assessment, and discard criteria.

More information
Forklift & Telehandler (Load Carrying Truck) Examination

Forklift & Telehandler (Load Carrying Truck) Examination

3 Days

£950.00 excl. VAT

This three-day course trains participants to perform thorough examinations of forklifts and telehandlers in line with LOLER, PUWER, and GN28 guidance. Covering common equipment types, it is delivered by LEEA-accredited trainers and supported by experienced inspection engineers. The course combines theory and practical training to assess condition, identify defects, and apply discard criteria.

More information

Lifting Operation Courses

Introduction to LOLER & PUWER - LEEA Accredited

Introduction to LOLER & PUWER - LEEA Accredited

0.5 Days

£225.00 excl. VAT

This half-day LEEA-accredited course introduces LOLER and PUWER. Designed for those involved in the use or management of lifting equipment, it provides a foundational understanding of legal responsibilities, inspection requirements, and safe use practices. Delivered by experienced trainers, the course helps participants to recognise risks, support compliance, and promote safer lifting operations.

More information
Electric Overhead Travelling Crane Operation

Electric Overhead Travelling Crane Operation

1 Day

£475.00 excl. VAT

This one-day course delivers essential theory and practical skills for the safe operation of overhead travelling cranes. Led by experienced LEEA-accredited trainers, it covers key operational procedures, safety regulations, and best practices, enabling participants to operate cranes confidently and in compliance with legal and industry standards.

More information
An Introduction to Lifting and Slinging

An Introduction to Lifting and Slinging

1 Day

£425.00 excl. VAT

This one-day course offers participants a foundational introduction to slinging and lifting principles. Delivered by experienced LEEA-accredited trainers and supported by insights from active industry professionals, the course covers key lifting techniques, safety regulations, and best practices. Training participants will gain essential knowledge to support safe and compliant lifting operations.

More information
Lifting and Slinging - LEEA Accredited

Lifting and Slinging - LEEA Accredited

2 Days

£750.00 excl. VAT

This two-day LEEA-accredited course offers a comprehensive understanding of slinging and lifting operations. Delivered by experienced trainers and supported by real-world insights, it covers lifting theory, equipment selection, sling configurations, load control, and legislation to help participants to carry out lifting tasks safely and compliantly.

More information
Rigging Loft Management - LEEA Accredited

Rigging Loft Management - LEEA Accredited

2 Days

£750.00 excl. VAT

This two-day LEEA-accredited course is designed for those managing rigging lofts. Delivered by experienced trainers and drawing on insights from our inspection engineers, it combines theory and hands-on training. Participants learn to inspect and maintain lifting accessories, manage records, implement quarantine procedures, and ensure compliance with LOLER, PUWER, and industry standards.

More information
Appointed Person for Lifting Operations - LEEA Accredited

Appointed Person for Lifting Operations - LEEA Accredited

5 Days

£1,700.00 excl. VAT

This five-day LEEA-accredited course prepares those taking on the Appointed Person role to plan and manage lifting operations in line with LOLER and PUWER. Combining theory and practical exercises, it covers lift planning, risk assessment, equipment selection, method statements, and safe coordination of personnel for compliant site operations.

More information